Canon EOS 5DS Instruction Manual Download Page 308

Page: 308 / 534

Shooting Time-lapse Movies

308

Card- time left

The total length of a time-lapse movie that can be recorded on the
card based on its remaining capacity.

Exit the menu.

Press the <

> button to turn off

the menu screen.

Read the message.

Read the message and select [

Take test shots.

Set the exposure and shooting
functions, and press the shutter
button halfway to focus as you do
with Live View shooting.

Press the shutter button completely to
start taking test shots. The test
images will be recorded to the card.

If there are no problems with the test
shots, go to the next step.

To take test shots again, repeat this
step.

Press the <

> button.

The camera will be ready to start
shooting a time-lapse movie.

To return to step 9, press the <

button again.

Summary of Contents for EOS 5DS























































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands

Canon EOS 5DS, Instruction Manual

Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands