Canon EOS-1 Instruction Manual Download

Page: 82 / 176

Program AE

Select < > on the LCD panel.

•

While pressing the <

> button, turn the <

dial to select < >. Then release the <

button.

Focus the subject.

•

Look through the viewfinder and aim the Area AF
ellipse over the subject. Then press the shutter
button halfway.

The AF point which achieves focus flashes briefly.
At the same time, the green focus confirmation light
<

> in the viewfinder is displayed.

The exposure setting will be displayed on the LCD
panel and in the viewfinder.

•

If the focus confirmation light <

> in the viewfinder

blinks, the shutter will lock and a picture cannot be
taken. See “When Autofocus Fails (Manual
Focusing)” on page 73.

AF point

Focus confirmation
light
Area AF ellipse

Shutter speed

Aperture

Exposure setting

Make sure the exposure setting is not
blinking, then press the shutter button
fully to take the picture.

is an abbreviation for Auto Exposure.

The Program AE mode is set automatically as the camera’s initial shooting mode.
(

→

p.34)

Summary of Contents for EOS-1

















































































































































































Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands

Canon EOS-1, Instruction Manual

Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands