Canon EOS-1 Instruction Manual Download

Page: 125 / 176

125

Playback Images

Erasing an Image

Erasing All Images on the CF Card

MENU

On the menu, select “Erase all on CF
card.”

•

Press the <

> button.

•

While pressing the <

> button, turn the <

dial to select <

•

While pressing the <

> button, turn the <

dial to select “Erase all on CF card.” Then let go of
the <

> button.

Erase the images.

•

While pressing the <

> button, turn the <

dial to select “OK.” Then let go of the <

button.

All unprotected images on the CF card will be
erased.

•

After the images are erased, the menu will reap-
pear.

•

To exit the menu and turn off the LCD monitor,
press the <

> button.

Protected images cannot be erased with the camera. To erase protected images,
first cancel the image protection. (

→

p.119)

This procedure is convenient for erasing all unprotected images at one time while
retaining the protected images on the CF card.

Once an image is erased, it cannot be recovered. Make sure you are erasing the
right images.

Summary of Contents for EOS-1

















































































































































































Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands

Canon EOS-1, Instruction Manual

Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands