Canon EOS-1 Instruction Manual Download

Page: 163 / 176

163

Reference

The CF card is not properly installed.

Install the CF card properly. (

→

p.27)

The CF card is full.

Use a new CF card or erase unnecessary images. (

→

p.27, 122)

The battery is exhausted.

Recharge the battery. (

→

p.22)

You did not focus well. (The focus confirmation light in the viewfinder blinked.)

Press the shutter button halfway and focus the subject. If you still
cannot focus properly, focus manually. (

→

p.74)

The LCD monitor screen is dirty.

Use a soft cloth to clean the screen.

The LCD’s service life has expired.

Contact your dealer or Canon Service Center.

The lens focus mode switch is set to <

> or < >.

Set the lens focus mode switch to <

>. (

→

p.26)

Camera shake occured when you pressed the shutter button.

To prevent camera shake, hold the camera still and press the shutter
button gently. (

→

p.29, 35)

The data in the CF card is damaged.

Format the CF card. (

→

p.126)

Use the correct CF card. (

→

p.2, 3)

The image cannot
be erased.

The image is protected.

Cancel the protection first. (

→

p.119)

The date and time
is wrong.

The correct date and time has not been set.

Set the correct date and time. (

→

p.148)

No images can be
shot or recorded.

The LCD monitor
does not display a
clear image.

The image is out
of focus.

The CF card
cannot be used.

Troubleshooting Guide

Shooting

Image Review

Summary of Contents for EOS-1

















































































































































































Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands

Canon EOS-1, Instruction Manual

Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands