Canon EOS-1, Instruction Manual

Page: 53 / 176

53
Settings for Images
2
Reviewing Images
MENU
Changing the Review Time
You can change the number of seconds the image is displayed on the LCD monitor after it is
captured.
On the menu, select “Review time”.
•
Press the < > button.
•
While pressing the < > button, turn the < >
dial to select < >.
•
While pressing the < > button, turn the < >
dial to select “Review time.” Then let go of the
<
> button.
1
Set the desired Review time.
•
While pressing the < > button, turn the < >
dial to select the desired review time. Then go of the
<
> button.
s The menu will reappear.
•
To exit the menu and turn off the LCD monitor,
press the <
> button.
2
The “Hold” setting will set the review time to half of the auto power off time.
(
→
p.130) If auto power off is “Off,” the review time will be 15 min.
Automatic Playback After Continuous Shooting
•
After continuous shooting when the access lamp is blinking, you can press the < >
button to playback the image that is currently being saved on the CF card.
When you press the button, you will not see the images shot continuously from the
beginning, but from the image currently being saved on the CF card.
•
To turn off the LCD monitor, press the < > button.
•
After the last shot in the continuous shooting burst is taken, the image will be
saved onto the CF card as the access lamp blinks. Be sure not to open the CF
card slot cover or remove the battery while the access lamp is blinking.
•
If the selection mark is positioned under the < > icon on the rear LCD panel,
automatic playback is not possible.