Canon EOS-1 Instruction Manual Download Page 85

Page: 85 / 176

Exposure Control

Shutter-Priority AE

Exposure Warnings

•

C.Fn-16 enables the safety shift feature. (

→

p.137)

In the shutter-priority AE mode, if a correct exposure cannot be obtained with any
aperture set by the camera, the camera automatically sets a faster or slower
shutter speed. This feature is called safety shift.

•

C.Fn-06 enables the shutter speed to be set in full-stop or 1/2-stop increments
instead of the standard 1/3-stop increments. (

→

p.134)

•

If the lens’ maximum aperture (lowest f/number like f/1.4) blinks, it
indicates underexposure.
Turn the <

> dial to set a slower shutter speed until the aperture

display stops blinking.

•

If the lens’ minimum aperture (highest f/number like f/22) blinks, it
indicates overexposure. Turn the <

> dial to set a faster shutter speed

until the aperture display stops blinking.

Summary of Contents for EOS-1

















































































































































































Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands

Canon EOS-1, Instruction Manual

Search results

Summary of Contents for EOS-1

Reviews:

Related manuals for EOS-1

Brands by name

Popular brands