63
CAUTION
• Remove documents that remain inside the scanner carefully. Your
documents could be damaged or you could be injured by paper
cuts.
• Remove documents that remain inside the scanner completely.
Paper shreds remaining inside the scanner may cause future jams
or damage.
1
Remove any documents that remain in the eject tray.
2
Press the Open/Close button and gently raise the upper
unit.
CAUTION
Be careful to avoid pinching your hands when opening and
closing the upper unit.
3
Remove any documents that remain inside the scanner.
IMPORTANT
• If the document has stopped in the midst of ejecting to the eject
tray, raise the upper unit only slightly to remove it.
• If the document remains completely inside the scanner, open
the upper unit as far as it will go to remove it.
4
Close the upper unit slowly (
a
). Make sure that the upper
unit is completely closed by pushing on both edges with
both hands until you hear a click (
b
).
5
Check to verify the last saved image, and perform
rescanning.
IMPORTANT
• Even if a document is ejected onto the eject tray, the scanned
image of the document may not be saved. Before rescanning,
always check the last saved image.
Open/Close Button