manualshive.com logo in svg

Canon DR-X10C - imageFORMULA - Document Scanner, User Manual

Share
Download
Canon DR-X10C - imageFORMULA - Document Scanner User Manual Download Page 76

76

• Some scanning mode and resolution settings may produce 

incomplete page images. In this case, try decreasing the resolution 
or, if scanning in color mode, switch to black and white.

Locking the Keys (Invalidate Key 
Function)

Press and hold the [Enter] key for approximately 5 seconds to display 
the Invalidate Key setting.

Press the [

] key to select [OK], and press [Enter] to disable the 

keys.

IMPORTANT

• To unlock the keys, press and hold the [Enter] key again for 

approximately 5 seconds, or turn the scanner OFF and back ON.

• After turning the scanner OFF, wait at least 10 seconds before 

turning it back ON.

Imprinter (Optional)

The scanner imprinter options consist of the Pre-Imprinter, which 
prints a text string on document pages before scanning them, and the 
Post-Imprinter, which prints a text string on document pages after 
scanning them. For details, contact your dealer or service 
representative.

 

Hint

• The text to print and the printing position can be specified in the 

ISIS/TWAIN driver.

• Even if the post-imprinter is not installed, you can add a specified 

text string onto scanned images.

Enter Key

Pre-Imprinter

Post-Imprinter

Scanning Unit

Summary of Contents for DR-X10C - imageFORMULA - Document Scanner

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands