![background image](http://html.mh-extra.com/html/canon/dr-x10c-imageformula-document-scanner/dr-x10c-imageformula-document-scanner_user-manual_62896016.webp)
16
STEP 5
Turning the Power ON
The power of the scanner can be turned ON and OFF with the power
switch on the front of the scanner.
1
Make sure that the scanner and computer are connected
properly.
2
Press the power switch.
IMPORTANT
• When connecting the scanner to the computer using a SCSI cable,
be sure to turn ON the scanner first, and then turn ON the computer.
If you turn ON the computer first, the scanner may not be properly
recognized by the computer.
• Press the power switch again to turn the scanner OFF.
• The Auto USB Power Switching function automatically turns the
scanner OFF when the computer is turned OFF.
• After turning the scanner OFF, wait at least 10 seconds before
turning it ON again.
• If you will not be using the scanner for an extended period,
disconnect the power cord from the AC outlet for safety.
Hint
• Depending on your country or region, the Auto Power OFF function
may be enabled under factory default conditions. When this
function is enabled, the scanner will turn OFF automatically if no
operations are performed for 4 hours. (
)
• When connected with the USB cable, the following message
balloon appears on the task bar when the scanner's power switch
is turned on the first time. If you wait a while, automatic scanner
recognition will end and the scanner will become ready to use.
Power Switch