![background image](http://html.mh-extra.com/html/canon/dr-x10c-imageformula-document-scanner/dr-x10c-imageformula-document-scanner_user-manual_62896024.webp)
24
●
When cleaning the scanner, turn the power switch OFF and
disconnect the power cord from the power supply.
●
Some parts can only be cleaned when the power is turned ON. In
these cases, be careful to avoid electric shock.
●
Clean the scanner using a slightly dampened cloth which has been
well wrung out. Never use alcohol, benzene, paint thinner, or any
other flammable substances.
●
If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately turn
the power switch OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer or
service representative for further information.
●
Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power switch OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.
●
Before moving the scanner, make sure to turn the power switch
OFF, and disconnect the power plug from the power outlet.
CAUTION
●
Do not install the scanner on a surface that is unstable or tilted, or
in an area subject to excessive vibrations, as this may cause the
scanner to fall, resulting in personal injury or damage to the
scanner.
●
Do not block the ventilation openings. Doing so could case the
scanner to overheat, creating a risk of fire.
●
Never place small metal objects such as staples, paper clips, or
jewelry on the scanner. These items may fall into the scanner, and
cause a fire or electric shock. Should such objects ever fall inside
the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact
your local authorized Canon dealer or service representative to
have the unit serviced.
●
Do not locate the scanner in a humid or dusty location. Doing so
may cause a fire or electric shock.
●
Do not place objects on top of the scanner. Such objects may tip or
fall over, resulting in personal injury.
●
When unplugging the power cord, grasp it firmly by its plug. Do not
pull directly on the power cord, as this may damage or expose the
cord’s internal wiring, resulting in a fire or electric shock.
●
Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you
will be unable to unplug it in an emergency.
●
Do not allow water or flammable substances (alcohol, paint thinner,
benzene, etc.) to spill into the scanner, as this may result in a fire or
electric shock.
●
Turn OFF the power switch for safety when not using the scanner
for a long period of time, such as overnight. Also, turn OFF the
power switch, and disconnect the power cord from the power outlet
for safety when the machine will not be used for an extended period
of time, such as during consecutive holidays.
●
Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it. This may result in personal injury. Be
extra careful of neckties and long hair. If anything becomes caught
in the scanner, immediately disconnect the power cord to stop the
scanner.