![background image](http://html.mh-extra.com/html/tertium/nfc-scanner/nfc-scanner_user-manual_1090401001.webp)
NFC SCANNER |
USER GUIDE
Step 1
Step 2
Switch on the NFC Scanner by press and hold the
finger on the button until you hear a beep.
Make sure the battery of the NFC Scanner is charged
sufficiently. If the blue LED is blinking once per
second, you need to charge it.
Step 3
Position the NFC Scanner antenna correctly respect
to the NFC area* of the LED driver for an optimal
connection (see explanation in the next page).
Step 4
To start the reading or writing data to or from the
LED driver you do not need to push the button,
just follow the App instruction and wait the flashing
of the yellow LED.
*NFC area is located over or sideway the LED
driver. It is indicated with the NFC logo.
TERTIUM Technology S.r.l.
- Via Emilia, 323 - 56121 Pisa - Italy - Tel. +39 050 576777 - www.tertiumtechnology.com