Canon DADF-R1, Service Manual

Page: 29 / 222

Chapter 2
2-3
2.2 Installation Procedure
2.2.1 Turning Off the Host Machine
(imagePRESS C1 Series)
0013-5068
2.2.2 Points to Note When Turning
ON/OFF the power of Host
Machine (imagePRESS
C7000Series)
0016-3369
T-2-1
2.2.3 Installing the DADF-R1
(imagePRESS C1 Series)
0013-0864
1) Remove the reader unit right cover [1].
- 3 cover rubber pieces [2]
- 3 screws [3]
F-2-3
Turning Off the Main Power
Be sure to go through the following steps
when turning off the main power to protect
the machine's hard disk:
1) Hold down the control panel power switch
for 3 sec or more.
2) Follow the shut-down instructions on the
screen. (The main power will go off
automatically.)
3) Disconnect the 2 power plugs of the
machine (1 at the for the rear, 1 at the left
side).
Power-On Order for Turning On the
Power When Pickup/Delivery Accessories
are Connected
Be sure to turn on the power in the correct
order otherwise it may cause
an error because the host machine fails to
recognize accessories
including this equipment.
<Power-On Order>
1) Accessories (accessories including this
equipment)
2) Host machine
MEMO:
There is no power-on order among
accessories
Points to Note When Turning Off the
Main Power of the Host Machine
Be sure to turn off the main power in the
following order to protect hard disk of the
host machine.
1) Press the power switch on control panel
for 3 sec or more.
2) Follow the instruction on the shutdown
sequence screen (the main power switch will
go off automatically).
3) Turn off the breaker.
4) Disconnect the power plug.
[1]
[2]
[2]
[2]
[3]
[3]
[3]