Canon DADF-R1, Service Manual

Page: 134 / 222

Chapter 4
4-10
4.4.3.3 Attaching the Feeding Belt
0013-3564
1) Insert a screwdriver between the DADF and the
feeding assembly as shown to increase the gap.
2) Fit in the feeding belt, and pull out the screwdriver
when the belt has come into contact with it; then,
push in the belt.
F-4-39
4.4.4 Separation Belt
4.4.4.1 Preparation for Removing the
Separation Belt
0013-3566
1) Remove the front cover.
2) Remove the main cover.
4.4.4.2 Removing the Separation Belt
0013-3567
1) Remove the 2 screws, and loosen the separation
unit.
2) Remove the grip ring [1] at the front; then, remove
the clutch ring [2] and the clutch [3].
F-4-40
3) Disconnect the 2 connectors [1], and remove the 2
screws [2]; then, detach the separation unit [3].
F-4-41
F-4-42
[3]
[2] [1]
[3]
[2]
[1]
[2]
[3]