Canon DADF-R1, Service Manual

Page: 143 / 222

Chapter 4
4-19
5) Move the side guides (front) [1]/(rear) [2] to the
inside; then, remove the 2 screws [3], and detach
it.
F-4-79
After mounting it, be sure to adjust the horizontal
registration.
4.4.10 Manual Feed Registration
Roller
4.4.10.1 Preparation for Removing the
Manual Feed Registration
0013-3578
1) Remove the front cover.
2) Remove the main cover.
4.4.10.2 Removing the Manual Feed
Registration Roller
0013-3579
1) Remove the 3 screws [1], and disconnect the
connector [2]; then, remove the solenoid unit [3]
from the delivery assembly front side plate.
F-4-80
2) Remove the 2 screws [1], and detach the manual
feed registration sensor PCB assembly [2].
F-4-81
3) Remove the grip ring [2] and the bearing [3] from
the manual feed registration roller [1]. (delivery
assembly front side plate)
F-4-82
4) Remove the grip ring [2] of the manual feed
registration roller [1].
5) Remove the E-ring [4] of the feeding belt roller
shaft [3].
6) Remove the gear [5] and the parallel pin [6].
[3]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[1] [2]
[2] [1] [3]