Canon DADF-R1, Service Manual

Page: 128 / 222

Chapter 4
4-4
4) Remove the screw [1], and detach the cover [2].
5) Remove the 2 screws [3], and detach the reversal
motor unit [4].
F-4-14
4.3.2 Pickup Motor
4.3.2.1 Preparation for Removing the
Pickup Motor Unit
0013-3538
1) Remove the front cover.
2) Remove the main cover.
3) Remove the separation motor unit.
4.3.2.2 Removing the Pickup Motor Unit
0013-3539
1) Disconnect J601 [1] and J602 [2], and free the
cable from the edge saddle [3].
2) Locate the harness connected to the belt motor,
and free it from the wire saddle [3].
F-4-15
3) Remove the 2 screws [1], and detach the belt
motor driver PCB unit [2].
F-4-16
4) Detach the fan mtor unit [1] by removing the 2
screws [2].
F-4-17
5) Disconnect the pick up motor unit [1] connecter
[2] and open/closed sensor (rear) [3] connecter
[4].
F-4-18
[1]
[4]
[3]
[3]
[2]
[1] [2] [3]
[1]
[2]
[1]
[2]
[2]
[1]
[4]
[3]