Canon CP-300, User Manual, Page: 78 / 204

74
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
8
Use [
▲
] or [
▼
] to select "Print head" and press [Enter] key.
Printing will be started.
Media Head Position
ɻɻ
Cutter
Print head
IMPORTANT
• Check the head position of the loaded print media, then select "Cutter" or "Print head."
Select "Print head" to print on the print media directly after loading it.
Cutter
Print head
• If the media head position is set incorrectly, you may end up printing on the transport
roller or have a big margin at the tip.
• After the media head position is set, the "Media Head Position" screen will not be
displayed again in the following cases.
- When the cover is not opened.
- When the power is not turned off .
- When you do not change the type or size of the print media in the print settings.
- When the feed function
(P.173)
and remove function
(P.28)
are not used.
9
Removing the tube.
When printing is fi nished, the tube will be
automatically cut (Full cut). Also, a cut (Half
cut) can be made between the tubes.
IMPORTANT
• After printing, remove the print media from the printer to prevent warping or
deformation of the print media.
• Do not place any objects around the outlet of this product. If there is an object blocking the
outlet, the tube or label tape may not be ejected straight and may be cut in a bent shape.