Canon CP-300, User Manual, Page: 141 / 204

137
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
[Alignment]
If you set the set length to "Specify," you can change the alignment. The
default setting for alignment is set to "Centered."
For print image, refer to "Specify the Cut Length and Alignment (P.56)" .
[Character Size]
Sets the character size. The default setting is "3 mm Norm."
When printing from the MK Desktop Utility, the character size cannot be
set to "1.3 mm Norm."
[Character Space]
Sets the space between characters. The default setting is "Narrow."
[Lines]
Sets the number of lines. The default setting is "1 Line."
[Continuous]
If you want to set up repeat printing for a page, enter the number of times.
The value can be set in the range of 1 to 200 (times).
NOTE
• When the set length is specifi ed, the settings for character size, frame, and character
space may not be able to be changed.
• When the print media is a label, if the set length is "less than 8.0 mm", "Rule confi guration"
(Centered) is applied and the setting cannot be changed.
6
Click [OK].
When you click [OK], the format setting
are confi rmed, and the settings are
refl ected in the preview area.
NOTE
• The settings for [Continuous] (continuous print) are not refl ected in the display of the
preview area.