manualshive.com logo in svg

Canon CP-300, User Manual, Page: 114 / 204

Share
Download
Canon CP-300 User Manual Download Page 114

110

Table of 

C

o

nt

ents

Preparation/

Setup

Pr

int U

sing 

a C
omput

er

Appendix

Index

P

rint/Sa

ve

Input/Edit

Names of 

Components

M

aint
enanc

e/

Print

er  S
ettings

Tr

ouble

-

shooting

  Installing  the  Software

The "MK Desktop Utility" application software specially designed for this product 
allows you to input and edit text on your computer.

 Install the  MK Desktop Utility and Printer driver

Install the "MK Desktop Utility" application software and the printer driver.
This section explains how to install the "MK Desktop Utility" application software 
and the printer driver at the same time.

IMPORTANT

•  For more information on the MK Desktop Utility operating environment and printer 

driver, refer to 

"System Requirements for Software (P.192)"

.

•  Log on as a user with administrative privileges.

•  Close any virus detection programs or programs that run in the background on the system 

beforehand.

•  If the printer and computer are connected with a USB cable, unplug the connected USB 

cable.

•  Be sure to use the supplied genuine USB cable.

Summary of Contents for CP-300













































































































































































































Reviews:

No comments