Canon CP-300, User Manual, Page: 188 / 204

184
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Message Details/Solution
No fi les in selected
folder. None of the fi les are saved in the selected folder.
Select the folder again.
99 fi les already exists in
selected folder. 1 A maximum of 99 fi les can be saved in one folder.
Delete unnecessary fi les before saving, or save them
in a diff erent folder.
Exceeded character
limit.
Cannot change. The character count limit for the specifi ed cut length
has been exceeded. Change the cut length setting
(P.55) or delete the characters.
Cannot input.
Change length or
character size.
Cannot input text with the specifi ed character size
and cut length. Change the cut length
(P.55) or
character size
(P.43)
.
Numbering data setting
exists. The page you are trying to divide or combine has
numbering. Delete the numbering.
(P.51)
No character data. You need to have already entered text in advance
to display the printing preference display. Enter
characters before pressing the [Print] key.
Data beyond cut length
will be deleted. OK? When "Yes" is selected, data exceeding the cut length
will be deleted automatically.
If you select "No," the deletion will be canceled.
Change the cut length or the number of characters.
Close cover and press
any key. You cannot print with the cover open. Close the
cover and press any key.
Print media isn
’
t set. Reload the print media correctly. Press the [Enter] key
to start printing.
(P.21)
Depending on the type of tube, the tube may not be
detected. In this case, set the print media to "Clear
Tube" in the print settings and print.
(P.72)
Ribbon cassette isn
’
t
set.
Load the ribbon cassette. Press the [Enter] key to
resume printing.
(P.18)