manualshive.com logo in svg

Canon CP-300, User Manual, Page: 5 / 204

Share
Download
Canon CP-300 User Manual Download Page 5

1

Before You Begin

Viewing This Manual

 

■

Marks

WARNING

Instructions that, if ignored, could result in death or serious personal injury caused by 
incorrect operation of the equipment. These must be observed for safe operation.

CAUTION

Instructions that, if ignored, could result in personal injury or material damage caused by 
incorrect operation of the equipment. These must be observed for safe operation.

IMPORTANT

Instructions including important information. To avoid damage and injury or improper 
use of the product, be sure to read these indications.

NOTE

Instructions including notes for operation and additional explanations.

 

■

About the Text

•   Copying this manual or any part of this manual without permission is strictly 

forbidden.

•  The information in this manual is subject to change without notice.

•   We have done our best to make this manual as complete and accurate as possible, 

and we ask you to contact your place of purchase. If you fi nd any omissions or 
mistakes in this manual.

•   The text of this manual describes an example environment using a Windows 10. 

Some display screens and operating procedures may differ when using a different 
operating system.

Summary of Contents for CP-300













































































































































































































Reviews:

No comments