Canon CP-300, User Manual, Page: 189 / 204

185
Table of
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing
a C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Message Details/Solution
End of media.
Pull out print media
The print media ran out during printing. Pull out
the print media from the printer and press any
key. Replace the print media with a new one and
press the [Enter] key to resume printing from the
interrupted page.
(P.21)
Replace print media. Load a new print media and press the [Enter] key to
resume printing.
(P.21)
End of ribbon.
Replace ribbon cassette.
Replace the ribbon cassette with a new one and
press the [Enter] key to resume printing from the
interrupted page.
Print head position can
’
t
be initialized.
Press any key. If the same message appears again,
contact your place of purchase.
Print head can
’
t be
moved to print position.
Cut position can
’
t be
initialized.
Size switch lever is not
positioned
correctly. Proceed?
The size of the print media set on the printing
preference display does not match the position of
the size switch lever.
(P.22)
If you select "Yes," printing will start.
To reset the settings, select "No" and follow the
instructions on the screen to set the size switch lever
to the correct position. Press any key to start printing.
Data check.
Resetting completely
An error has occurred in the data and all settings
have reverted to the settings at the time of purchase.
All saved fi les have also been deleted.
Power turned off when
saving fi le.
Checking saved data.
Check the saved fi les. If the data is not saved, re-save
it.
Power turned off when
loading fi le.
Resetting input data.
The data being entered will be deleted. Re-enter the
data.