6
- An environment where the temperature and/or humidity can change
dramatically, or where condensation occurs
- A poorly ventilated room (Ozone is generated by the printer in use,
however, the amount is too small to be harmful to the human body.
However, if you are going to use the printer for a long time in a poorly
ventilated room or to perform a large amount of printing, ventilate the
room to keep the working environment comfortable.)
- A location near products that generate magnetic waves or
electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- A place where salt content, corrosive gases such as ammonia, or toxic
gases are contained
- A platform that may warp from the weight of the printer and optional
accessories, or the printer is liable to sink (such as a carpet or mat)
Dimensions of the Printer
The dimensions of each part of the printer are indicated in the following figures.
For details on the dimensions of the printer with the optional paper feeder
installed, see "Installing a Paper Feeder," on p. 49.
Installation Space
Select an installation location where you can secure the following amounts of
free space around the printer, and a surface that can support the weight of the
printer. The dimensions of the space required around the components and the
positions of the feet are as follows.
For details on the installation space of the printer with the optional paper feeder
installed, see "Installing a Paper Feeder," on p. 49.
Precautions for Handling
CAUTION
If an error should occurred to the hard disk in the printer unit, the
received, recorded, and saved data may be deleted. It is
recommended not to record or save important data on the hard disk.
Canon assumes no responsibility whatsoever for any damages or
losses arising from data loss by the customers.
Front Surface
636.5
Multi-purpose tray
Auxiliary tray
Tray extension
Paper cassette
Toner cover
Front cover
Top cover
651
258
45
160
545
78
380
300
230
(mm)
Front Surface
Required Peripheral Space
100
(mm)
780
1526
740
745
135
100
100
(mm)
Top cover
Front cover
Paper
cassette
Foot Positions
The rubber feet are 6 mm high, and dimensions of the top surface are 15 mm x 23 mm for the
front feet, and 24 mm x 10 mm for the rear feet.
Front Surface
(mm)
63
442.7
101.3
39.6
415.7
89.7
63
442.7
101.3
45
418
82
Downloaded from ManualsPrinter.com Manuals
