41
Step
7
Turning the Printer ON
and Checking the
Printer Operation
This section describes the procedures for turning the printer ON and
checking the printer operation.
Turning the Printer ON
IMPORTANT
•
Do not turn the printer ON immediately after turning it OFF. If you want to
turn the printer ON again after turning it OFF, wait at least 10 seconds after
turning the printer OFF before turning it ON again.
•
If the printer does not operate properly or an error message appears, see
"When the Printer Does Not Operate Properly," on p. 43.
•
Be sure to set the paper cassette in the printer before you turn the power
ON for the first time after you install the printer.
NOTE
When you turn the power ON for the first time after you install a hard disk
or when a problem has occurred to the hard disk, the printer is ready to
print after approximately 60 seconds after it is turned ON because the
hard disk is formatted after the printer is turned ON.
1
Press " " of the power switch to turn the printer ON.
The indicators and display on the control panel come on, and the printer initiates a
self-diagnostic test on the printer unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the Online indicator,
Ready indicator and Paper Source indicator for the currently selected paper source
come on, <00 READY> appears in the display, and the printer is ready to print.
The following information is displayed in the display.
Step7
Online
Feeder Selection
Ready
Job
Job
Power
Reset
Utility
Settings
Message
Cancel Job
HDD
Main Power
OK
Online
Indicator
Paper Source
Indicators
Ready
Indicator
00 READY A4
Printable and not
processing print data
Size of paper in the
currently selected
paper source
Downloaded from ManualsPrinter.com Manuals
