manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 394

Replacing the Toner Cartridge

7-44

7

Routine Maintenance

CAUTION

 

•

Keep toner out of the reach of small children. If toner is ingested, consult a 
physician immediately.

•

If toner gets onto your hands or clothing, wash it off immediately with cold 
water. Do not use warm water as this may set the toner permanently, and you 
may not be able to remove the toner stains.

IMPORTANT

 

•

Use only toner cartridges intended for use with this machine.

•

Do not replace toner cartridges until the message prompting you to do so appears.

•

The color of the toner to be replaced is shown on the touch panel display.

•

If you continue copying or printing in black-and-white after cyan, magenta, or yellow toner 
runs out, do not remove the depleted toner cartridges from the machine.

•

You can display an error message informing the user that the remaining toner is low. For 
instructions on displaying the remaining toner error message, see "Displaying the 
Remaining Toner Error Message," on p. 6-41. For instructions on erasing the remaining 
toner error message, see "Erasing the Remaining Toner Error Message," on p. 4-62.

•

Do not touch the shutter door and gear on the toner cartridge, as this may cause the 
toner cartridge to leak.

Black Toner Cartridge

Cyan, Magenta, or 
Yellow Toner  Cartridge

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands