manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 365

Envelope Feeder Attachment-C2 (Optional)

7-15

7

Routine Maintenance

- Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, 

burn, vaporize, or emit smells under the heat of a fixing unit (approximately 418

). 

Depending on the materials used for the seal, the glue may melt under the fixing unit's 
heat, sealing the envelopes.

•

If the optional Finisher-Z1 and Copy Tray-J1 are attached, envelopes are output to Tray 
A, regardless of the Tray Designation settings.

•

If the optional Inner 2way Tray-D1 and Copy Tray-J1 are attached, envelopes are output 
to Tray A, even if Copy Tray-J1 is specified as the output destination.

•

If you are printing on envelopes, empty the output tray when up to 10 printed envelopes 
accumulate in the tray.

•

Envelopes should be stored in a place away from high-temperatures and humidity.

•

If there is a temperature difference between the location where the envelopes were 
stored and the location where the envelopes are being printed, leave the envelopes in the 
printing location at room temperature before you use them.

•

Correctly match the paper size dial, size switch, and Envelope Cassette settings in 
Common Settings (from the Additional Functions screen) with the size of the envelopes 
being loaded. Failure to do so may cause paper jams, dirty prints, or make the inside of 
the machine dirty.

•

The width guides on the envelope feeder attachment can be changed so that the 
following envelopes can be loaded. Using envelopes other than these may result in paper 
jams, dirty prints, or make the inside of the machine dirty.

•

If you want to adjust the width guides to load ISO-C5 or ISO-B5 envelopes, contact your 
local authorized Canon dealer.

NOTE

 

•

For more information on using envelopes other than COM10 No.10, see "Changing 
Envelope Sizes," on p. 7-21.

•

For more information on envelope types that can be loaded in the envelope feeder 
attachment, see "Available Paper Stock," on p. 2-56.

-
-
-
-

COM10 No.10:
Monarch: Catalog Glove No.8:
DL:
Yougata 4:

Mailwell No.582
Mailwell No.553
Mailwell/Schneidersöne No.11345
Uzumaki Y-401

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands