manualshive.com logo in svg

Canon Color imageRUNNER C3380 Series, Reference Manual

Share
Download
Canon Color imageRUNNER C3380 Series Reference Manual Download Page 153

Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1

3-25

3

Optional Equipment

f

Front Cover of the Saddle 
Finisher-Y2

Open this cover to replace the staple cartridge, 
remove jammed paper, or clear a staple jam in 
the stapler unit and saddle stitcher unit. (For 
instructions on replacing the staple cartridge in 
the stapler unit, see "Replacing the Staple 
Cartridge in the Stapler Unit," on p. 7-33. For 
instructions on replacing the staple cartridge in 
the saddle stitcher unit, see "Replacing the 
Staple Cartridge in the Saddle Stitcher Unit," on 
p. 7-37. For instructions on clearing a paper jam, 
see "Inside the Front Cover of the Saddle 
Finisher-Y2 (Optional)," on p. 8-49, and "Saddle 
Stitcher Unit (Optional)," on p. 8-71. For 
instructions on clearing a staple jam in the 
stapler unit, see "Finisher-Y1/Saddle 
Finisher-Y2 (Optional)," on p. 8-68. For 
instructions on clearing a staple jam in the 
saddle stitcher unit, see "Saddle Stitcher Unit 
(Optional)," on p. 8-71.)

g

Booklet Tray (Saddle Finisher-Y2 Only)

Prints that are saddle stitched are output to this 
tray.

h

Booklet Tray Guide (Saddle 
Finisher-Y2 Only)

Set this guide to match the size of the output 
paper. (See "Finishing Modes," on p. 3-25.)

i

Lower Output Tray

Prints are output to this tray. You can set the Tray 
Designation mode to designate this tray for 
outputting prints when using certain functions. 
(See "Output Tray Designation," on p. 4-40.)

j

Upper Output Tray

Prints are output to this tray. You can set the Tray 
Designation mode to designate this tray for 
outputting prints when using certain functions. 
(See "Output Tray Designation," on p. 4-40.)

 

Finishing Modes

The Finisher-Y1 and Saddle Finisher-Y2 are equipped with the following finishing 
modes.

CAUTION

 

•

Do not place anything other than output paper in the trays of the finisher, as 
doing so may damage the trays.

•

Do not place anything under the trays of the finisher, as doing so may damage 
the trays.

IMPORTANT

 

Finishing modes cannot be set if you are using 12" x 18" (305 mm x 457 mm) or 
12 5/8" x 17 11/16" (320 mm x 450 mm) paper.

Summary of Contents for Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands