Canon Color imageRUNNER C3380 Series, Reference Manual

Page: 157 / 550

Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1 3-29
3
Optional Equipment
■
Saddle Stitch Mode
The Saddle Stitch mode enables you to make booklets, consisting of pages folded and
stapled in the center.
IMPORTANT
•
The Saddle Stitch mode is available only if the Saddle Finisher-Y2 is attached.
•
The maximum number of sheets, including cover sheets, that can be saddle stitched is
as follows:
•
To change the amount of pages that can be saddle stitched, contact your local authorized
Canon dealer.
•
The paper sizes that can be saddle stitched are: 12" x 18", 11" x 17", LGL, or LTRR.
•
The accuracy of folds created in the Saddle Stitch mode may vary depending on the
paper type and the number of sheets.
•
Make sure to adjust the Booklet Tray guide to match the size of the output paper before
outputting saddle stitched prints, as shown below.
•
A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the
output paper.
- 15 sheets (17 to 20 lb bond (64 to 80 g/m 2
))
- 10 sheets (20 to 28 lb bond (81 to 105 g/m 2 ))
6
5
4
3
4
3
2
1
3
8
7
6
5
8
7
2
1
6
8
1
Originals
Copy
The pages are folded
and stapled in the center to
form a booklet.
12" x 18" or 11" x 17" LGL or LTRR