Canon Color imageCLASS MF8280Cw, Service Manual

Page: 230 / 401

4
4
4-160
4-160
Disassembly/Assembly > Document exposure/feeder system > Separating the ADF Unit/Cop Reader Unit > Procedure
Disassembly/Assembly > Document exposure/feeder system > Separating the ADF Unit/Cop Reader Unit > Procedure
7) Disconnect the grounding [1] and grounding [2] (only for models with ADF).
• 2 Screws [3]
8) Open and remove the ADF Unit/Cop Reader Unit [4].
• 2 Hooks [5]
[4]
[5]
[5]
[3]
x2
[1] [2]
F-4-351
Separating the ADF Unit/Cop Reader Unit
■ Preparation
1) Remove the Right Cover. Refer to page 4-147.
2) Remove the Left Cover. Refer to page 4-144.
3) Remove the Rear Upper Cover. Refer to page 4-153.
4) Remove the ADF Unit/Cop Reader Unit. Refer to page 4-158
■ Procedure
CAUTION:
Be sure to perform "After replacing ADF unit (Refer to page 4-36)" and "After replacing
reader unit (Refer to page 4-37)" when replacing the ADF Unit and Reader Unit,
respectively.
1) Place the ADF Unit and Reader Unit in the open status as shown in the figure below (only
for models with ADF).
F-4-352