Canon Color imageCLASS MF8280Cw, Service Manual

Page: 369 / 401

8
8
8-21
8-21
Service Mode > COPIER > FUNCTION > MISC-P
Service Mode > COPIER > FUNCTION > MISC-P
■
MISC-R
COPIER > FUNCTION > MISC-R M82 M85
SCANLAMP Light-up check of CIS Unit LED
○ ○
Details To light up CIS Unit LED for 3 seconds.
Light up in the following order: R->G->B->R->G-B.
Use case When replacing the CIS Unit LED
Adj/set/operate method Select the item, and then press OK key.
Required time
3 seconds
SCAN-ON Execution of copyboard reading
○ ○
Details To execute reading of the original on the Copyboard
Glass.
Adj/set/operate method 1) Set paper on the Copyboard Glass.
2) Select the item, and then press OK key.
T-8-13
■
MISC-P
COPIER > FUNCTION > MISC-P M82 M85
SRVC-DAT Output of system data list/system dump list
▲ ▲
Details To execute report output of the system data list and the
system dump list.
System data list: The service software switches and
parameters used in FAX function
System dump list: The number of sends/receives, the
number of pages sent/received, the number of sheets
printed/read, the number of errors, etc.
Adj/set/operate method Select the item, and then press OK key.
SYS-DAT Output of system data list
▲ ▲
Details To execute report output of the system data list.
The service software switches and parameters used in
FAX function are output.
Adj/set/operate method Select the item, and then press OK key.
SYS-DMP Output of system dump list
▲ ▲
Details To execute report output of the system dump list.
The number of sends/receives, the number of pages
sent/received, the number of sheets printed/read, the
number of errors, etc. are output.
Adj/set/operate method Select the item, and then press OK key.
CNTR Output of counter report
○ ○
Details To output the counter report.
The usage of functions (reading, recording,
communication and copy) is output.
Adj/set/operate method Select the item, and then press OK key.
ERR-LOG Output of error log report
○ ○ Details To output the error log report.
Adj/set/operate method Select the item, and then press OK key.
SPEC Output of spec report
○ ○
Details To output the spec report.
The current device specifications such as the location,
model information, and ROM version are output.
Adj/set/operate method Select the item, and then press OK key.
T-8-14