Canon Color imageCLASS MF8280Cw, Service Manual

Page: 373 / 401

8
8
8-25
8-25
Service Mode > COPIER > FUNCTION > SPLMAN
Service Mode > COPIER > FUNCTION > SPLMAN
COPIER > FUNCTION > SPLMAN M82 M85
SPL65677 Increase of paper leading edge margin
○ ○
Details To increase the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased
by 0.1 mm.
If the setting is incompatible with SPL68676 (decrease
of margin), the setting is disabled (the margin will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit 0.1 mm
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL68676
SPL68676 Decrease of paper leading edge margin
○ ○
Details To decrease the margin on the leading edge of paper.
As the value is incremented by 1, the margin is decreased
by 0.1 mm.
If the setting is incompatible with SPL65677(increase
of margin), the setting is disabled (the margin will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit 0.1 mm
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL65677
SPL68677 Increase of paper right and left margins
○ ○
Details To increase the margins on the right and left edges of
paper.
As the value is incremented by 1, the margin is increased
by 0.1 mm.
If the setting is incompatible with SPL25607 (decrease
of margins), the setting is disabled (the margins will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit 0.1 mm
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL25607
COPIER > FUNCTION > SPLMAN M82 M85
SPL25607 Decrease of paper right and left margins
○ ○
Details To decrease the margins on the right and left edges of
paper.
As the value is incremented by 1, the margin is decreased
by 0.1 mm.
If the setting is incompatible with SPL68677 (increase
of margins), the setting is disabled (the margins will be
standard).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit 0.1 mm
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL68677
SPL93822 Setting of department ID count all clear
○ ○
Details To set whether to disable clearing of all department ID
counts.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Be sure to perform this mode after consulting with the
system administrator at user’s site.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL78788
SPL78788 Setting of department ID count clear
○ ○
Details To set whether to disable clearing of department ID count.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Be sure to perform this mode after consulting with the
system administrator at user’s site.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
Related service mode COPIER> FUNCTION> SPLMAN> SPL93822
SPL41250 Reset of calibration
○ ○
Details When the user allows printing at absence of toner,
calibration using toner is disabled.
As a remedy, calibration reset is executed by this switch.
Use case When the user allows printing after absence of toner is
displayed.
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value 0