manualshive.com logo in svg

Canon Color imageCLASS MF8280Cw, Service Manual

Share
Download
Canon Color imageCLASS MF8280Cw Service Manual Download Page 231

4

4

4-161

4-161

Disassembly/Assembly > Document exposure/feeder system > Separating the ADF Unit/Cop Reader Unit > Procedure

Disassembly/Assembly > Document exposure/feeder system > Separating the ADF Unit/Cop Reader Unit > Procedure

2) Remove the Reader Unit Lower Cover [1] (only for models with ADF).
•  1 Screw [2]
•  4 Claws [3]
•  2 Harnesses [4]
•  2 Flat Cables [5]
•  2 Grounding Wires [6]

[1]

[2]

[3]

[3]

[3]

[6]

[3]

[5]

[5]

[4]

x6

3) Remove the cable [1] and the grounding wire [2] (only for models with ADF).
•  6 wire guides [3]

x6

[3]

[1]

[2]

[3]

[3]

F-4-353

F-4-354

4) Open the ADF Unit/Copyboard and separeate it to the dirrection of the arrow from the 

Reader Unit [2].

[1]

[2]

NOTE:

If ADF Unit/Copyboard [1] is not opened to the position[A],  it cannot be separate from 

the Reader Unit, because of the 2 claws [2].

[A]

[1]

[2]

[2]

[3]

F-4-356

F-4-355

Summary of Contents for Color imageCLASS MF8280Cw


















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands