manualshive.com logo in svg

Canon Color imageCLASS MF8280Cw, Service Manual

Share
Download
Canon Color imageCLASS MF8280Cw Service Manual Download Page 178

4

4

4-108

4-108

Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit  > Procedure

Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit  > Procedure

5) Free the harness (black) [1] from the Harness Guide [A], [B], [C] and [D].

[A]

[B]

[D]

[1]

[C]

6) Free the harness (purple) [1] from the Harness Guide [A] and [C].
7) Free the harness (green) [2] from the Harness Guide [A], [C] and [D].

[A]

[D]

[C]

[1]

[2]

F-4-236

F-4-237

8) Remove the harness [1] and the guide [2].
•  1 Claws [3]
•  2 Bosses [4]

[3]

[4]

[2]

[1]

[1]

[4]

[2]

F-4-238

Summary of Contents for Color imageCLASS MF8280Cw


















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands