manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 510

List of Error Messages

8-80

8

T

roub

leshooting

# 701

 

Cause

The specified Department ID does not exist, or the password has changed.

 

Remedy

Enter the correct Department ID or password using 

 - 

 (numeric keys) on 

the control panel, and try again. (See "Entering the Department ID and 
Password," on p. 2-35.)

# 703

 

Cause

The hard disk is full, and no more images can be scanned.

 

Remedy 1 Wait a few moments, and try scanning again after the other send jobs are 

complete.

 

Remedy 2 Erase documents stored in inboxes. If the machine still does not operate 

normally, turn the main power OFF, and then back ON again.

#711

 

Cause

The inbox memory is full.

 

Remedy

Erase unnecessary documents stored in the inbox. (See Chapter 6, "Receiving 
Documents," in the 

Sending and Facsimile Guide

, or Chapter 5, "Using/

Arranging Documents Stored in an Inbox," in the 

Mail Box Guide

.)

# 712

 

Cause

The maximum number of documents are already stored in the inbox.

 

Remedy

Erase unnecessary documents stored in the inbox. (See Chapter 6, "Receiving 
Documents," in the 

Sending and Facsimile Guide

, or Chapter 5, "Using/

Arranging Documents Stored in an Inbox," in the 

Mail Box Guide

.)

# 749

 

Cause

You could not execute the job because a service call message is being 
displayed.

 

Remedy

Turn the main power OFF, wait 10 or more seconds, and turn the main power 
back ON. If the machine still does not work normally, turn the main power OFF, 
disconnect the machine, and contact your local authorized Canon dealer.

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands