manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 369

License Registration

6-55

6

System Manager Settings

License Registration

You must register a license key to enable optional modes, such as the Encrypted 
PDF mode.

NOTE

 

•

A license key can be obtained via a Web browser to access the license management 
system. Access the system by entering the following URL: http://www.canon.com/lms/
license/.

•

The license key must be registered on the actual machine. You cannot register the 
license key through the Remote UI.

1

Press 

 (Additional Functions) 

➞

 [System Settings].

If necessary, see the screen shot in step 1 of "Specifying the System Manager 
Settings," on p. 6-2.

If the System Manager ID and System Password have been set, enter the System 
Manager ID and System Password using 

 - 

 (numeric keys) 

➞

 press 

 (ID).

2

Press [

▼

] or [

▲

] until [License Registration] appears 

➞

 press 

[License Registration].

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands