manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 414

Replacing the Waste Toner Container

7-34

7

Routine Maintenance

Replacing the Waste Toner Container

When the waste toner container is full, the procedure for replacing the container 
appears on the touch panel display, as shown below. Follow the instructions on the 
touch panel display, and the procedure described below to help you replace the 
waste toner container.

If you press [Recover Later], you can continue operations, such as setting modes 
and scanning originals, even if you do not replace the waste toner container 
immediately.

WARNING

 

•

Do not burn or throw used waste toner containers into open flames. Also, do not 
store waste toner containers in places exposed to open flames, as this may 
cause the toner to ignite, resulting in burns or a fire.

•

Your local authorized Canon dealer will dispose of the used waste toner 
container. Use the provided cover to cover up the opening of the used waste 
toner container.

CAUTION

 

Used toner cannot be reused. Do not mix new and used toner together.

IMPORTANT

 

•

Use only waste toner containers intended for use with this machine.

•

Do not replace the waste toner container before the message prompting you to replace it 
appears on the touch panel display.

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands