manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 463

Clearing Paper Jams

8-33

8

T

roub

leshooting

1

Open the right cover of the main unit.

If the optional Paper Deck-P1 is attached to the main unit, move the paper deck 
away from the main unit before proceeding with this procedure. For more 
information, see "Paper Deck-P1," on p. 3-13.

2

Remove any jammed paper.

3

Press and release the button on the transport unit (located on 
the right side of the main unit), and pull the transport unit out.

Transport Unit

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands