manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 507

List of Error Messages

8-77

8

T

roub

leshooting

 Paper is jammed in the indicated location. Remove the jammed paper.

 

Cause

An original or paper has jammed inside the machine, preventing prints from 
being made.

 

Remedy

Remove the jammed original or paper from the machine by following the 
instructions on the touch panel display. (See "Clearing Paper Jams," on p. 8-3.)

 Remaining toner is low. (Magenta) (on the imageRUNNER C3220) 

Prepare new magenta toner. (Printing still possible.) (on the imageRUNNER C2620)

 

Cause

Toner of the displayed color is running low.

 

Remedy

Prepare the displayed color's toner cartridge for replacement. (See "Replacing 
the Toner Cartridge," on p. 7-28.)

 Replace toner cartridge. (Black)

 

Cause

Printing is not possible because toner of the displayed color has run out.

 

Remedy

Replace the displayed color's toner cartridge. (See "Replacing the Toner 
Cartridge," on p. 7-28.)

 Replace toner cartridge. (Black copying is possible.)

 

Cause

Color copying is not possible because toner of the displayed color has run out.

 

Remedy

Replace the displayed color's toner cartridge. (See "Replacing the Toner 
Cartridge," on p. 7-28.)

 Replace toner cartridge. (Black printing is possible.)

 

Cause

Color copying or color printing is not possible because toner of the displayed 
color has run out.

 

Remedy

Replace the displayed color's toner cartridge. (See "Replacing the Toner 
Cartridge," on p. 7-28.)

Insert toner cartridge. (Cyan)

 

Cause

The toner cartridge of the displayed color is not inserted properly.

 

Remedy

Make sure that the toner cartridge is inserted properly. (See "Replacing the 
Toner Cartridge," on p. 7-28.)

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands