Canon C2620 Reference Manual Download Page 465

Page: 465 / 554

Clearing Paper Jams

8-35

roub

leshooting

Lift the back cover of the transport unit, and remove any
jammed paper. Then, close the back cover.

CAUTION

When closing the back cover of the transport unit, be careful not to get
your fingers caught, as this may result in personal injury.

Place your hand where the hand symbol ( ) is located on the
transport unit, and gently push the transport unit back into
the machine.

CAUTION

•

Make sure that the transport unit is returned to its original position
properly. Failure to do so may result in damage to the machine.

•

When pushing the transport unit back into the machine, be careful not to
get your fingers caught, as this may result in personal injury.

Hand Symbol

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C2620

Reviews:

Brands by name

Popular brands

Canon C2620, Reference Manual

Search results

Summary of Contents for C2620

Reviews:

Brands by name

Popular brands