manualshive.com logo in svg

Canon C2620, Reference Manual

Share
Download
Canon C2620 Reference Manual Download Page 428

Consumables

7-48

7

Routine Maintenance

■

Toner

If a message prompting you to replace the toner cartridge appears on the touch panel 
display, replace the used toner cartridge with a new one of the color displayed.

Toner comes in four colors: cyan, magenta, yellow, and black.

Check the toner color that you need to replace before ordering toner from your local 
authorized Canon dealer. Also, when replacing the toner cartridge, make sure that you 
replace toner of the correct color.

Use only toner cartridges intended for use with this machine.

WARNING

 

•

Do not burn or throw used toner cartridges into open flames, as this may cause 
the toner remaining inside the cartridges to ignite, resulting in burns or a fire.

•

Do not store toner cartridges in places exposed to open flames, as this may 
cause the toner to ignite, resulting in burns or a fire.

CAUTION

 

Keep toner and other consumables out of the reach of small children. If these 
items are ingested, consult a physician immediately.

IMPORTANT

 

Store toner cartridges in a cool location, away from direct sunlight. (The recommended 
storage conditions are: temperatures below 86˚F, and humidity below 80%.)

Summary of Contents for C2620











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands