Canon BJC-S830D User Manual Download

Page: 54 / 201

Description of Print Settings

Printer Driver Functions (Macintosh)

Register Settings Dialog Box

To open the Register Settings dialog box, click the Apply... button in the Print dialog box.

(1)

Settings
Displays a list of the registered print settings.

(2)

Defaults
Restores the print settings selected in Settings to defaults. A check mark appears
next to the selected print settings.

(3)

Apply
Saves the settings currently specified in the Print dialog box. After clicking the button,
enter the name under which the settings are to be saved.

(4)

Remove
Deletes unwanted print settings. To delete unwanted settings, select the settings in
Settings and click the Remove button.

(1)

(3)
(4)

(5)

(2)

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands