Canon BJC-S830D User Manual Download

Page: 126 / 201

Photo Paper Pro 4" x 6" Perforated

126

Printing Media

■

Handling of Printed Output

• Do not stack more than 20 sheets in the paper output tray.

• Do not touch the printed surface until the ink dries (approx. 30 minutes).

Colors in dark images may appear indistinct at first, but become clearer after about 30
minutes.

• Images may smudge if you place them in an album before the ink is completely dry. It is

recommended that you allow the ink to dry for 24 hours.

• Do not attempt to dry the ink with a hairdryer or by exposing printed sheets to direct

sunlight.

■

Storing Printed Output

Follow the instructions described in "

Photo Paper Pro

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands