Canon BJC-S830D User Manual Download

Page: 166 / 201

Paper Does Not Feed Properly or Paper Jams

166

Troubleshooting

Paper Does Not Feed Properly

■

Confirm the paper conditions.

• If you are using non-Canon brand media, make sure that the paper is not too thick (less

than 28 lb / 105g/m

• The number of sheets loaded does not exceed the recommended level.

• The paper is not creased, curled or wrinkled.

➡

Compatible Media Types

■

Ensure that the left edge of the paper just touches the paper guide.

■

When printing envelopes, refer to "

Envelopes

" in "

Printing Media

," and prepare

the envelopes before printing.

Once you have prepared the envelopes, load them in the printer in portrait orientation. If
the envelopes are placed in landscape orientation, they may not feed properly.

■

When using transparencies, load one sheet of plain paper in the printer first, and
then place the transparencies on top of it.

The last transparency may not feed properly unless there is a sheet of plain paper
beneath it.

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands