Canon BJC-S830D User Manual Download

Page: 63 / 201

Uninstalling Printer Drivers

Printer Driver Functions (Macintosh)

Uninstalling Printer Drivers

When a printer driver is no longer needed, use the Installer to delete all the program files
associated with the driver at the same time.

Before proceeding, ensure that you save any unsaved files in any currently running
applications.

Load the

Setup Software & User's Guide CD-ROM.

Double-click the Printer Driver folder.

Double-click the Installer icon.

When the Software License Agreement is displayed, click Accept.

Select Uninstall from the drop-down menu and then click Uninstall.

Note

➤

If a warning message appears, indicating that other applications are
running:
• Click Cancel and save the document(s) if there are any unsaved

documents open in the other applications.

• Click Continue to continue the uninstall operation.

After the uninstall is complete, a message appears prompting you to restart
your computer. Click Restart.

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands