Canon BJC-S830D User Manual Download

Page: 13 / 201

Safety Precautions

■

Working around the printer

Never put your hands or fingers in the printer while it is printing.

Do not place metal objects (paper clips, staples, etc.) or containers of flammable
solvents (alcohol, thinners, etc.) on top of the printer.

If any foreign object (metal or liquid) falls into the printer, unplug the power cord and call
the Canon Customer Care Center.

■

Print head and ink tanks

For safety reasons store print head and ink tanks out of the reach of small children.

If a child ingests any ink, consult a doctor immediately.

Do not shake print head or ink tanks.

Ink may leak out and stain clothing or the surrounding area.

Never touch the electrical contacts on a print head after printing.

The metal parts may be very hot and could cause burns.

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands