Canon BJC-S830D User Manual Download

Page: 128 / 201

Photo Paper Plus Glossy

128

Printing Media

■

Printer Driver Settings

• Media Type:

Photo Paper Plus Glossy

• Page Size:

Ensure that the setting matches the size set in the application.

■

Handling of Printed Output

• Remove each sheet as soon as it is printed.

• Colors may slightly change if papers are stacked up before the ink is completely dry. It

is recommended that you allow the ink to dry for 24 hours.

• Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct

sunlight.

■

Storing Printed Output

• Do not store or display printouts in hot, damp or humid conditions. Never expose them

to heat or direct sunlight.

• Store printouts in photo albums, photo frames or presentation binders to protect them

from direct exposure to air or sunlight.

• Do not mount printouts in an adhesive-type album, as you may not be able to remove

them.

• Be aware that some types of clear plastic folders and albums may cause the edges of

the paper to turn yellow.

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands