Canon BJC-S830D User Manual Download

Page: 178 / 201

An Error Message is Displayed on the Screen

178

Troubleshooting

Other Error Messages

■

If a message with the format "Error No.: Xn" (where "X" represents a letter and "n"
represents a number) is displayed:

Error No.: X202
Not enough memory for printing. Increase available memory by closing any other
applications currently running.

Error No.: X203
There is a problem with the printer driver. Uninstall the printer driver and reinstall it.

➡

Uninstalling Printer Drivers

Error No.: X300
Ensure that the power is on, and that the printer and the computer are securely
connected. If the problem remains, verify the Chooser setting.

In the Apple menu, select Chooser.

Click the S830D icon and ensure that S830D is selected as the connected
destination.

If it is not selected, select it.

If the problem remains, delete all unnecessary documents from the Extensions and
Control Panels folder.

Summary of Contents for BJC-S830D










































































































































































































Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands

Canon BJC-S830D, User Manual

Search results

Summary of Contents for BJC-S830D

Reviews:

Related manuals for BJC-S830D

Brands by name

Popular brands