Canon BJC-70 User Manual Download

Page: 175 / 221

Chapter 10

Installing and Using the Battery Pack

165

Using the Printer With the Battery Pack

To print using the battery pack, follow these steps:

Disconnect the AC adapter from the battery case.

❏

If the AC adapter is connected, the printer will not print.

Attach the parallel connector to connect the printer to the host
computer.

❏

Open the interface cover and connect the parallel cable.

❏

Align the cable connector with the printer’s interface port so the
shapes match.

❏

Lift the back of the battery case and printer if necessary.

❏

Gently press the cable connector into the port.

❏

Secure the cable connector by snapping the two wire clips (located
on the printer) into the cable connector.

Installing/Using

the Battery Pack

Summary of Contents for BJC-70






























































































































































































































Search results

Summary of Contents for BJC-70

Reviews:

Related manuals for BJC-70

Brands by name

Popular brands

Canon BJC-70, User Manual

Search results

Summary of Contents for BJC-70

Reviews:

Related manuals for BJC-70

Brands by name

Popular brands