Canon BESTEM-D01/R Manual Download Page 55

Page: 55 / 82

3. Adjustment Mode

３．

Ａ

Ad
jus
tm
en
t

Mo
de

ｄ

ｊ

３．Ａｄ

3.
A

dj
usm
tn
et
Mo
de

ｊｕ

④

Unit Selecting

Button

～

To check for IN (input) ….

Display sequence

3-13

OM0001

1. Select unit for input with “

④

unit selecting button”.

2. Display item to check with page scroll buttons (Top, Prev, Next, Last).
3. Select [IN] at “

③

input/output swap button”.

4. Activate sensor (ON/OFF) of item to be checked.

“

②

input/output status display” will turn to yellow.

Sensor is functioning correctly if “

②

I/O status” corresponds to ON/OFF by looking at the button

color changes. If the display does not change, either the sensor is damage or connector is loose or
there is connection defect. Please check.

To check for OUT (output) ….

Display sequence

Select unit for input with “

④

unit selecting button”.

Display item to check with page scroll buttons (Top, Prev., Next, Last).
Select [OUT] at “

③

input/output swap button”.

Click “

②

I/O display button” of item to be checked (ON/OFF).

“

②

input/output status display” will turn to yellow.

Sensor is functioning correctly if “

②

I/O status” corresponds to ON/OFF by looking at the button

color changes. If the display does not change, either the sensor is damage or connector is loose or
there is connection defect. Please check.

Summary of Contents for BESTEM-D01/R



















































































Search results

Summary of Contents for BESTEM-D01/R

Reviews:

Related manuals for BESTEM-D01/R

Brands by name

Popular brands

Canon BESTEM-D01/R, Manual

Search results

Summary of Contents for BESTEM-D01/R

Reviews:

Related manuals for BESTEM-D01/R

Brands by name

Popular brands