Canon AX-C4343W Technical Document Download Page 8

Page: 8 / 86

Safety information

Follow these safeguards and properly use the product to prevent injury and damage to any
equipment/data.

1.1

Safety precautions

WARNING

Operating/storage environment

• Do not use or store the product near flammable chemicals such as

alcohol, thinner, benzine, etc.

If chemicals are spilled or evaporate, it could result in fire or electric shock

through contact with electric parts inside the product. Also, some

disinfectants are flammable. Be sure to take care when using them.

• Do not connect the equipment with anything other than specified.

Doing so could result in fire or electric shock.

Power supply and cables

• Do not operate the product using any type of power supply other than

the one indicated on the rating label.

Otherwise, it could result in fire or electric shock.

• Do not handle the product with wet hands.

You may experience an electric shock that could result in death or serious

injury.

• Do not place heavy object on cables and cords, or do not pull, bend,

bundle, or step on them to prevent their sheath from being damaged,
and do not alter them neither.

Doing so may damage the cords which could result in fire or electric shock.

• Do not supply power to more than one piece of equipment using the

same AC outlet.

Doing so could result in fire or electric shock.

• Do not turn ON the power when condensation has formed on the

product.

Doing so could result in fire or electric shock.

• Do not connect a multiple portable socket-outlet or extension cord to

the system.

Prohibited

000_DIA-2019-019-E03_AX-C4343W.book Page 8 Friday, November 27, 2020 12:38 PM

Summary of Contents for AX-C4343W























































































Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands

Canon AX-C4343W, Technical Document

Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands