Canon AX-C4343W, Technical Document

Page: 44 / 86

4
Operating procedures
44
ii)
Apply the fastener hook where you
want to attach the ready indicator
(behind the monitor) (
).
2
Attach the ready indicator.
Join the hook-and-loop fasteners to
attach the ready indicator (
). Check that
the volume adjustment buttons and the
mute switch can be operated and that the
LED lamps and IR data port can be seen.
This is suitable in cases in which the ready indicator and the image-capture computer
are not usually moved, including such environments as an X-ray exposure room.
1
Attach hook-and-loop fasteners.
i)
Apply the fastener loops to the ready indicator
(on the side of the speaker holes) on the
positioning rib (
).
The fastener loops are attached using the adhesive
on the back.
ii)
Apply the fastener hook where you
want to attach the ready indicator (on a
wall or post) (
).
Fastener hook
4.6.3 Attaching a ready indicator to a wall or post
Positioning rib
Fastener loop
Remove any oil, water, or dust on the attachment side of the hook-and-loop
fastener using a cloth slightly damped with a neutral detergent.
Information
Fastener
hook
000_DIA-2019-019-E03_AX-C4343W.book Page 44 Friday, November 27, 2020 12:38 PM